360A-3 Illuminated Touch Activator- 3 Core
Illuminated Touch Activator- 3 Core
The Touch Timer offers energy saving features at the lightest of touches. With the reliability of a fully electronic unit, with no mechanical moving parts, it has all the features of the Elkay push button timer unit with the additional benefit of feather light touch activation.
Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device. It is also suitable for multi-way applications.
Illuminated Touch Activator- 3 Core: Key Features
- 16A any load type 3 wire (Live, switch live and trigger required)
- Blue Locator ring
- Can be interlinked with any Elkay activator switches (Only one master per circuit)
- Fits into 25mm depth back boxes
Illuminated Touch Activator- 3 Core 360A-3
- 3 core – Live, switch live and trigger required to connect to master
- No neutral required
- Any number of activators can be used in circuit and can also replace intermediate switches
Illuminated Touch Activator- 3 Core: Typical applications
- Can only be used with the master switch when multiple switches are required
Illuminated Touch Activator- 3 Core: Technical details
- 240V a.c. / 50Hz
- 16A all load types
- CE Marked
- Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
- Power Consumption 0.65W
- Flame Retardant ABS material
- RoHS compliant
| Part No. | Description | Configuration | Finish | Rating |
| 360A-3 | Illuminated Touch Timer 3 Core activator | 3 Core** | White | 16A-240V |
*PFCC-1 Capacitor will often be required when switching certain types of load with 2 wire Primary/Master switch
**Activator unit must be used with illuminated range for multiway switching and connected with 3 Core cables to Master unit.
Pushbutton Activator / Touch Activator / PIR Activator fitting (illuminated) – 3 Core connection to Master
This is an activator which is used in two way and intermediate circuits to enable multiple switching with a Master Timer.
Activators do not set the timing as they must be used with a Master Timer where the time setting dipswitches are located.
